What Should You Do If Your MacBook Pro Won’t Turn On?

Rate this post
What Should You Do If Your MacBook Pro Won’t Turn On?

Nothing gives you that terrible sensation like needing to restart your MacBook Pro and nothing occurs. It frequently happens when you need to study, have a deadline approaching, or need to write an essential email. Aren’t they the circumstances that occur when such things occur? They are, of course.

What to Do if Your MacBook Pro Won’t Turn On

Apple products are well-known for their dependability. Every gadget, regardless of its repute, has problems at some time.

This article assumes you haven’t recently changed anything on your MacBook Pro, such as adding or changing RAM, or made any substantial hardware adjustments. Here’s what to do if your MacBook Pro won’t power on in the case of macOS computers.

1. Check for Black/Blank Screen

MacBook Pro on a desk

When you first attempted to power on your MacBook Pro, did it turn on or did the screen remain black?

A dark screen is a typical laptop issue that is not limited to Apple. Before you do anything more, double-check that you haven’t mistakenly set the brightness to 0.

  • The top of the keyboard has two keys with sun images on them. The first is to darken the display, and the second is to brighten it. Although most computers will not go dark when using this option, it must be validated. Continue if changing the brightness has no effect on the black screen. Turn off the laptop, disconnect any linked devices, and restart it while paying close attention.

Is there any whirring? Are there any beeps? Noises from the fans? If you hear anything but see nothing, the problem might be with the screen, not the laptop. If you don’t hear anything, you should investigate more.

2. Boot to Recovery Mode

If you hear sounds and get feedback when completing tasks but the screen is blank, you may try booting the MacBook into Recovery Mode to solve any problems it may be experiencing.

    MacOS Utilites

Reboot your MacBook if Recovery Mode was successful, and it should boot properly. If not, keep reading; there might be additional concerns.

3. Check Power Connections

MacBook Pro charging

Connect your MacBook Pro charger to both the laptop and the power outlet. Check that both connections are secure. Check that the power cable is not damaged. If nothing occurs, try another wall socket or double-check the one you’re currently using with another device.

  What Is the Meaning of âOther Snapchattersâ?

Check the power cable or adapter if the outlet works. If you can borrow a spare for five minutes, go ahead and do it. Continue troubleshooting if the laptop still does not operate with a new charger.

Please keep in mind that the charger you select should meet the specifications of the OEM charger for your particular model.

Make careful to use Apple-branded cords whenever feasible. Some third-party charging cords lack the amperage required to properly charge your device, or the wires are fragile inside and might be harmed. Using the connection and charging block that comes with your device might be the key to turning on your computer.

4. Perform a Power Cycle

The next step is to execute a full power cycle on your MacBook Pro. Although it may seem to be paradoxical, this is a straightforward method that works the majority of the time.

  • Simply connect your MacBook into its charger and hold down the power button for at least 10 seconds. This step deactivates the laptop’s power and is equal to removing the battery. You could hear a noise when doing this.
  • MacBook Pro Power Cycle

If you’re lucky, it will start up successfully. If not, the MacBook Pro will still not boot, and you must continue reading.

5. Reset the SMC (Pre-2018)

MacBook Pro SMC Reset

The System Management Controller is abbreviated as SMC. It controls all of the Macbook Pro’s low-level operations, including as the power button, display, battery, fans, motion sensing, keyboard, indicator lights, and other similar aspects. Resetting the SMC is normally saved for last since it restores numerous settings to their defaults. If you’ve gone this far without a successful boot, consider resetting your MacBook Pro’s SMC.

  1. Unplug the laptop from the charger and any external devices.
  2. Remove all keys before reconnecting the charger.
  3. Then, to boot your laptop, hit the power button.

If the MacBook Pro was unable to start due to an SMC issue, it should now boot properly. Once it successfully starts up, you will need to tweak some hardware settings, but this is a tiny price to pay to have your laptop running again. This setback is undeniably preferable to expert repair, which requires time and money.

  How to Stop Text Messages From Email Addresses

Reset the SMC with T2 Chip

Apple incorporated the SMC and T2 chip in 2018. As a result, the instructions for later Macbook Pros change somewhat. Here’s what you should do:

  1. Make sure your Macbook is totally turned off.
  2. For seven seconds, hold down the Control, Option, and Shift keys.
  3. Hold the Power key in addition to the other three keys. Hold the keys for 7 seconds before releasing them.
  4. Now, press the Power button once again to switch on your Macbook.

6. Remove the Battery

MacBook Pro Batteries

If you have an older MacBook Pro, the battery may be detachable. Check under the battery to see whether it is detachable. If the battery falls out, you should notice a little locking clip next to it. To remove the battery, do the following steps:

  1. Remove the locking clip from underneath your MacBook Pro.
  2. Remove the plastic cover to reveal the battery.
  3. Pull the tiny tab to release and remove the battery.
  4. To reinsert or replace the battery, or to replace the flap and clip, repeat the operation.

If you possess a recent MacBook Pro with no replaceable battery, this process will not apply to you.

7. Unplug Your Accessories

MacBook Pro using Audio Recording Equipment

It may seem unusual, but if your MacBook isn’t launching correctly, try booting it with everything disconnected.

Any USB devices, printers, or other connections should be disconnected for the time being. After that, try restarting your MacBook by pressing and holding the power button.

If your MacBook Pro still won’t come on, there’s not much you can do without voiding the warranty. It would be preferable to go to your local Apple Store and have one of their professionals check it out. Hopefully, the specialists will be able to get your laptop running again without voiding the warranty or making matters worse!

Frequently Asked Questions

It’s never enjoyable to have computer problems, particularly when they prevent you from working or progressing on a project. Continue reading if you have any other queries concerning your MacBook.

Where is the power button on the new MacBook Pro?

Apple’s latest MacBook Pro is unlike any prior model. The top of the keyboard’s conventional keys have been replaced with a sleek touch-sensitive pad. The power button was also affected by the revisions. Users are no longer acquainted with Apple’s power icon, which allows them to simply recognize which button turns on their computer.

  How to Stop Spam Emails - Simple Blocks and Solutions

However, the placement of the power button stays identical, but on the latest MacBook Pro, the power button also functions as a fingerprint scanner.

What can I do if none of these solutions work for me?

If you’ve tried all of our suggestions and your MacBook Pro still won’t come on, you should contact Apple for more assistance. The Apple Support Service is really helpful and accessible around the clock.

Visit this site to determine your warranty coverage. To check the warranty status of your MacBook, you will need its serial number. If you can’t turn on your device, look for the serial number on the rear of the bottom of the machine in tiny text.

Will Apple still help me if my MacBook is out of warranty?

Yes! Despite the fact that it will cost you money, Apple’s specialists are qualified to operate on your MacBook and have OEM components (whereas not all third-party repair shops have access to parts specifically made for Apple devices).

If you’re worried about the cost of an after-warranty repair, you should first contact Apple. However, if your item is damaged (either liquid or physical), the indicated price may be more after examination.

Powering MacBooks

It’s always inconvenient when a MacBook won’t turn on, especially given their high price. If this occurs to you, either follow the instructions outlined above or take it to a reputable repair shop or Apple Store if it is still under warranty. Hopefully, a simple patch will be all that is required to get your MacBook Pro back up and running.

Share your ideas and experiences with MacBook Pros that don’t start up in the comments section below.

You are looking for information, articles, knowledge about the topic What Should You Do If Your MacBook Pro Won’t Turn On? on internet, you do not find the information you need! Here are the best content compiled and compiled by the kookydroidapps.com team, along with other related topics such as: Tech.

Related videos about What Should You Do If Your MacBook Pro Won’t Turn On?


Similar Posts